How To Clean Altro Flooring?
How To Clean Altro Safety Flooring
To clean your Altro non-slip flooring effectively, begin by removing loose dirt and debris. Sweep the area with a soft broom, paying attention to corners, and then vacuum to pick up finer particles like dust and grit. This step is crucial, as leaving debris behind could lead to scratches that damage the floor.
Next, mix an Altro floor cleaner, such as AltroClean 44, with warm water in a bucket. Apply the solution evenly to the floor to break down dirt and stains. Use a steam mop or rotary cleaning machine with the appropriate cleaning pad to scrub the surface. These tools will effectively remove scuff marks and stains without harming the floor.
After scrubbing, rinse the floor with clean water to remove any detergent residue, which can attract dirt and dull the surface. Finally, mop up any excess water with a clean, dry mop to ensure the floor is dry and safe to walk on. Regular cleaning will help maintain the appearance and durability of your safety flooring.
How To Remove Stains From Altro Flooring
When dealing with stubborn stains on Altro flooring, it's important to approach the cleaning process carefully for the best results. Start by applying your chosen cleaning solution directly to the stained areas and leaving it to sit for several minutes. This will help break down the stain and loosen any dirt or residue. After the solution has had time to work, scrub the affected area using a rotary cleaning machine fitted with an Altro UniPad™ or a steam mop for effective agitation. These tools will assist in lifting dirt and stains from the surface without damaging the floor.
If the stains persist after this initial treatment, a stronger cleaning solution may be required. A powerful alkaline cleaner, such as AltroClean 44, can be applied to the affected area for more persistent stains. Ensure that you follow the manufacturer's instructions regarding dilution and application. After using the stronger cleaner, rinse the floor thoroughly with clean water to remove any remaining residue. This will help maintain the floor's appearance and prevent any buildup of cleaning chemicals. Regular cleaning and prompt stain removal will help preserve the integrity and appearance of your Altro flooring over time.
How To Remove Scuff Marks From Altro Safety Flooring
To remove scuff marks, especially those caused by rubber, it’s essential to use the correct technique to avoid damaging your Altro flooring. For light scuff marks, you can use a rotary cleaning machine fitted with the appropriate machine pad. This will help to gently lift and remove the marks without causing abrasion to the floor surface. If you don't have access to a machine, you can also scrub the affected areas by hand using scouring powder, ensuring you apply light pressure to avoid scratching the floor.
Recommended Chemicals for Cleaning Altro Flooring
To clean your Altro flooring effectively, it’s best to use products specifically designed for vinyl floors. For regular maintenance, we recommend using AltroClean 44, a neutral detergent that will help remove dirt and grime without damaging the surface. If you need to tackle more stubborn stains or heavy dirt build-up, AltroClean 44+ is a stronger alkaline cleaner that provides a deeper clean.
It's important to avoid using bleach-based products, abrasive cleaners, or any cleaners containing pine oil, as these can damage the flooring, leave stains, and discolour the surface. By using the correct cleaning solutions, you can ensure your Altro flooring remains in good condition, preserving both its appearance and longevity.
Materials Known To Cause Staining On Altro Non-Slip Flooring
There are several materials that can cause staining on your Altro flooring, no matter where your flooring is installed - whether it’s a healthcare facility, school, commercial kitchen, office, or shopping centre.
Dyes from packaging, ink, and substances such as poster paints, permanent markers, and spray paint can lead to discolouration on your Altro flooring. These materials transfer easily onto the surface, leaving stubborn stains. Wet cardboard, with its exposure to moisture, can also cause staining over time. Certain cleaning chemicals, particularly those containing pine oil, may leave marks or residues that can discolour the flooring.
Additionally, rubber items are a common culprit for leaving scuff marks on your Altro flooring. This can include rubber furniture rests, trolley wheels, rubber-backed mats, and even certain shoe soles. Being mindful of these materials can help preserve the clean look of your floors and extend their lifespan.
Can I Use a Steam Mop for Altro Flooring?
Yes, you can use a steam mop on Altro flooring, as the heat from the steam is highly effective in breaking down dirt and eliminating bacteria. This makes it a great option for maintaining cleanliness, especially in areas like healthcare facilities and kitchens.
However, it’s important to use the steam mop correctly to avoid excessive moisture, which can affect the floor’s adhesive or finish. Always follow the manufacturer's instructions and ensure the mop head doesn't stay in one spot too long. After using the steam mop, dry the floor with a clean cloth to prevent moisture buildup. Regular steam cleaning, combined with proper maintenance, will keep your Altro flooring in good condition.